Printing starts too high Prusa i3 Tarantula autolevelsensor
Before printing starts height is ok. This happens in gcode. What i need to do to get this right? I included my config.h if it helps. I can't figure this one out. I'm using simplify 3D as software....
View ArticleRe: How did you get started?
Have been running a 'Prusa' P3 Steel for the last 2 years. The P3 Steel frame was a great investment, so rigid and well made. Changed stepper motors a few times, definitely worth getting the most...
View ArticleRamps 1.4 Z axis working backwards
I've been converting an old Makerbot Replicator to Ramps1.4 and very nearly succeeded But I've hit a problem that I just cannot work out. The axes home correctly, which in a Replicator is in the top...
View ArticleRe: Ramps 1.4 Z axis working backwards
just a point is the printer configuration correct in pronterface for z home postion
View ArticleRe: Problem with the A4899 drivers
Try disconnecting the pin. While not connected, the driver may detect a low level on the enable input. If it does not detect a low level, connect the ENABLE pin to GND via a solder bridge. For more...
View ArticleAnd this connects to......
Hi, I'm new to the Rep Rap community and am building a Makibox 3D kit that was offered about a year ago. I was doing OK despite the woeful "instructions", but I am stuck on a connection to the PCB....
View ArticleCan't print in bed centre
Hi everyone, I was hoping you would be able to help me. I’ve had my Tevo Tarantula for a couple of weeks now and I’ve been calibrating all of the stepper motors so that when I print a 20mm test cube...
View ArticleLCD Encoder
The rotary encoder on my lcd panel adjusts the speed when the printer is idle BUT when it starts to print, the decoder does nothing. How can i change the menu option in Marlin to counter this? Basil
View ArticleCrowdfunding help
Help by donating to my friend, he is asking for help, share it, donate, give an idea, everything is appreciated. Read his story here - [www.gofundme.com] and please, again, share and help. Today him,...
View ArticleRamps 1.4 Polyfuse Replacement Question.
Hey there, i see lots of people replacing the polyfuses on their Ramps 1.4 boards with automotive fuses, i was curious if i could replace the polyfuses with type A fuses (the cyndrilic style), for no...
View ArticleWho's running Simplify3d on Mac?
Who's running Simplify3d on Mac? Hi, Didi from Germany. I switched from PC System Windows to Apple IMac. Have worked great with S3D so far, but not for Mac. Who has it and can tell me? Here or PM....
View ArticleMarlin with 6963 LCD?
Hi folks, Does anyone know how to configure marlin to work with a T6963 128x64 GLCD? The config seems to be vendor specific, and '6963' does not occur in the source code, but the driver is supported...
View ArticleRe: Marlin with 6963 LCD?
I've gotten as far as U8g 'hello world' with the following constructor: U8GLIB_T6963_128X64 u8g(37, 35, 33, 31, 29, 27, 25, 23, 43, 45, 39, 41); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15,...
View ArticleRe: Scotland?
Hi, I just joined this forum and noticed that you say there is a group that meet, that is something I would be interested in. I’m basically looking for some help on a modification I have made
View ArticleSaying Hi
Hi there folks, I am new to 3d printing and am curious to know, although it maybe a silly question, but is this forum only for folks with reprap printers or 3d printing in general? I havent got a 3d...
View ArticleRe: Can't print in bed centre
Sorry i cannot help, just noticed your post look like i have symilar problem mine was working fine until I installed cura 4.3. Uninstalling and using older version of cura das not help. Have you find...
View ArticleNew extruder for Anycubic mega s over extruding
Bought an Anycubic mega S printer - [www.anycubic.com] and decided to change the extruder. However, the new extruder [www.amazon.co.uk] FYSETC 3D Printer Upgrade Extruder Long-Distance Remote Metal...
View ArticleDuet3D wifi remote control
Hi everybody, I'm currently working on my self-designed coreXY and I will use the duet wifi as mainboard. I got some questions about it: - i will use 2 different PSU, one for the hated bed and one for...
View ArticleRamps 1.4 not functionioning correctly after the PSU pulsed
My ramps 1.4 setup has stopped working properly after trying to use the PS_on pin on an ATX PSU without external power. The power supply began to pulse at about 1hz. After this mistake, the Ramps...
View ArticleConfiguring AUX 1 pins as Input GPIO to trigger internal Gcode loop within...
I have been trying to configure AUX 1 pins (pin D1) to become an input pin that would trigger a specific set of Gcode and once the command is completed, it would wait for another trigger of the pin...
View ArticleRe: New to 3D Needs help
Very new and very uneducated in 3d printers with a prusa i3 hephestos. This was given to me in a slightly ‘used’ condition with the lcd screen showing two parallel bars. I’ve managed to use the...
View ArticleRe: New to 3D Needs help
My previous msg I failed to note that the marlin.ino/ode file is not in the marlin.zip file.
View ArticlePertinax permanent printing plate
Hi guys, I have read in several forum posts that Pertinax is excellent as a permanent printing plate. Does anyone have any further experience for me? Do the plates have to be ground for better...
View ArticleLaser hook up to a ramps 1.4
My laser has 3 wires, positive negative and PWM How are these connected to the Ramps 1.4 board. Any advice appreciated, thanks
View Articlesintron 3D printer broken firmware
I've got a Sintron TW-102 3D printer, but the default firmware (seemingly a modification of Marlin 1.0.0 for Prusa Mendal) was set up without EEPROM saving of parameters enabled, and no suitable limit...
View ArticlePID or Runnaway ??
My settings are now irritating me. Everything heats up as it should, when starting with a cold printer, I heat the bed first (60-c), then the Extruder(220-c). It has never failed. I am now printing...
View ArticleLCD does not work after enabling define SERIAL_PORT_2 2
Creality >> CR-10S LCD RepRapDiscount FULL GRAPHIC Smart Controller If I disable // # define SERIAL_PORT_2 2 the LCD works If I enable port 2 #define SERIAL_PORT_2 2 #define BAUDRATE_2 115200...
View ArticleFilament Vendor UK
HI, I searching for my colleague for an Filament Vendor in The UK . Does anyone know an Vendor who send to UK who works with Business Customers ? ( Means Order comes er mail payment after delivery...
View Article